Laboratories
Major Equipments and Facilities
Sr. No. |
Name of Equipment |
Utility |
Photograph |
1 |
Hall Effect Set Up (Regular & Temperature variation) | Determination of Hall Coefficient, Density, Mobility and Type of Charge Carriers. | ![]() |
2 |
Four Probe Set Up | Measurement of Band gap of Material | ![]() |
3 |
Band Gap Set Up | ||
4 |
Dual and Single Trace Cathode Ray Oscilloscope | Waveform Display, Measurement of Frequency, Phase and Amplitude. | ![]() |
5 |
Signal Generator | ||
6 |
Vernier Microscope | Optical Measurements, Micro Measurements | ![]() |
7 |
Spectrometer | ||
8 |
Laser Source | ||
9 |
Sodium Vapour Lamp | ||
10 |
Dielectric Constant Set Up | Measurement of Dielectric Constant and Loss Factor | ![]() |
11 |
LCR Meter | Measurement of Capacitance, Inductance, Resistance | |
12 |
Ultrasonic Interferometer | Measurement of velocity of Ultrasonic waves | ![]() |
List of Available Experiments
S.No. |
Name of Experiment |
CO-PO |
1 |
To study variation of Hall voltage with current and magnetic field; and to determine Hall coefficient, concentration and polarity of charge carriers. | CO3 PO1,PO2 |
2 |
To measure the amplitude and frequency of sinusoidal voltage obtained from the secondary of a step down transformer using CRO. | CO 4 PO1,PO2 |
3 |
To study the static characteristics of semiconductor diode; (Germanium and Silicon diode) in forward and reverse bias mode | CO 3 PO1,PO2 |
4 |
To determine the forbidden energy gap of a semiconductor by studying the temperature variation of its receptivity using four probe method. | CO 3 PO1,PO2 |
5 |
To measure the phase shift introduced by a phase shift network using dual beam CRO . | CO 4 PO1,PO2 |
6 |
Determination of the velocity of ultrasonic waves in a non-electrolytic liquid by ultrasonic interferometer. | CO 5 PO1,PO2 |
7 |
To determine the radius of curvature of Plano-convex lens by using Newton’s Rings apparatus. | CO 1 PO1,PO2 |
8 |
To determine the thickness of thin paper using Air Wedge arrangement. | CO 1 PO1,PO2 |
9 |
To determine the wavelength of sodium light using Plane Transmission Grating. | CO 1 PO1,PO2 |
10 |
To determine the forbidden energy gap of a semiconductor by using PN junction diode in reverse biased mode. | CO 3 PO1,PO2 |
11 |
To study the dependence of Hall coefficient on temperature. | CO 3 PO1,PO2 |
Demonstration Experiment |
||
12 |
To study the Fraunhoffer diffraction pattern of a grating and to determine the wavelength of light using laser source. | CO 5 PO1,PO2 |