S.N |
Title of Programme |
Organised by |
Name of Participant |
Organised by |
Date |
1 |
Work System Design by IIT Roorkee |
NPTEL |
WAKDE PRACHITESH PRAKASH |
NPTEL |
04-08-2022 |
2 |
1) Work system design (NPTEL : IIT Roorkee) 2) Python 3.4.3 (spoken tutorial : IIT Bombay) |
NPTEL |
SUTRUPKAR PRATHMESH ANIL |
NPTEL |
25-07-2022 |
3 |
Work System Design/NPTEL |
NPTEL |
GHANGARE SAHIL UTTAM |
NPTEL |
02-08-2022 |
4 |
Work System Design NPTEL IIT ROORKEE & Python 3.4 spoken tutorial IIT BOMBAY |
NPTEL |
DHORE PARTH RAMESH |
NPTEL |
25-07-2022 |
5 |
Work system design by IIT roorkee |
NPTEL |
GORDE OM DILIPRAO |
NPTEL |
08-08-2022 |
6 |
Advanced machining processes -NPTEL , Python -Spoken Tutorial |
NPTEL |
SATFALE SAILI RAJU |
NPTEL |
22-08-2022 |
7 |
Advanced machining processes -NPTEL , Python -Spoken Tutorial |
NPTEL |
BAIS AYUSHI SUNILSINGH |
NPTEL |
23-08-2022 |
8 |
NPTEL, VAC, Spoken Tutorial Project, IIT Bombay. (VAC ANSYS undergoing valuation) |
NPTEL |
BHONSLE KALPESH SUNIL |
NPTEL |
16-08-2022 |
9 |
IIT Guwahati Advanced machining processes |
NPTEL |
BILGAIYA ANIKET HARISH |
NPTEL |
14-08-2022 |
10 |
Advance Machining Processess- IIT GUWAHATI |
NPTEL |
WELANKIWAR TEJAS VIVEK |
NPTEL |
20-08-2022 |
|
|
|
|
|
|
11 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
ARPITA SINGH |
Coursera |
Jan. 2023 |
12 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
MALWAR RUTUJA DEVMAN |
Coursera |
Jan. 2023 |
13 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
SAKSHEE ASHIK TEMBHURKAR |
Coursera |
Jan. 2023 |
14 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
BAWANKAR MOHANISH CHANDRAKANT |
Coursera |
Jan. 2023 |
15 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
CHAKOLE RITIK JITENDRA |
Coursera |
Jan. 2023 |
16 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
BOKDE RUSHABH VINOD |
Coursera |
Jan. 2023 |
17 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
GABHANE SAHADEO RAMESHWAR |
Coursera |
Jan. 2023 |
18 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
NIMSARKAR SHUBHAM PRAVIN |
Coursera |
Jan. 2023 |
19 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
KUMBHARE YASH RAMESH |
Coursera |
Jan. 2023 |
20 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
RAMTEKE ADITYA KUNDAN |
Coursera |
Jan. 2023 |
21 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
BHAWALKAR AKASH RAMESH |
Coursera |
Jan. 2023 |
22 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
NIKOSE ANITYA RAJENDRA |
Coursera |
Jan. 2023 |
23 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
JAWAJWAR NINAD RAMESH |
Coursera |
Jan. 2023 |
24 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
PAWAR PARIMAL KAILAS |
Coursera |
Jan. 2023 |
25 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
DEWANGAN PRATIK DHARMESH |
Coursera |
Jan. 2023 |
26 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
BHOYAR SATYAM NAMDEO |
Coursera |
Jan. 2023 |
27 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
UMRE SHASHVAT SURESH |
Coursera |
Jan. 2023 |
28 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
AYUSH SHAILENDRASINGH CHOUHAN |
Coursera |
Jan. 2023 |
29 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
MESHRAM SHREYASH RAJESH |
Coursera |
Jan. 2023 |
30 |
Robotics Specialization (6 courses) |
University of Pennsylvania |
SOMKUWAR SNEHANSHU SUNIL |
Coursera |
Jan. 2023 |
31 |
JAVA 11 ESSENTIALS |
Infosys |
GAJBHIYE SHRIKANT MARTAND |
Infosys |
January 8th 2023 |
32 |
Modeling and Design for Mechanical Engineers
with Autodesk Fusion 360 |
Autocad |
Pratham PRASANNA Thorat |
Coursera |
Jan 23, 2023 |
33 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Kawale Sakshi Naresh |
Coursera |
April-2023 |
34 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Nimje Aditya Raju |
Coursera |
April-2023 |
35 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Khode Akshay Moreshwar |
Coursera |
April-2023 |
36 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Patne Akshay Ashok |
Coursera |
April-2023 |
37 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Dhapodkar Chetan Pradip |
Coursera |
April-2023 |
38 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Gundawar Himanshu Suresh |
Coursera |
April-2023 |
39 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Meshram Himanshu Rajesh |
Coursera |
April-2023 |
40 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Badri Ibrahim Murtaza |
Coursera |
April-2023 |
41 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
BhangeSwayamdeep Arun |
Coursera |
April-2023 |
42 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Lokhande Udyan Vilas |
Coursera |
April-2023 |
43 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Pohane Aditya Dilip |
Coursera |
April-2023 |
44 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Anshuman PrafullMangrulkar |
Coursera |
April-2023 |
45 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
PatreSpandanDevidas |
Coursera |
April-2023 |
46 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Amale Vaibhav Rajesh |
Coursera |
April-2023 |
47 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Lakhote Sahil Chandrashekhar |
Coursera |
April-2023 |
48 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Wanjari Anmol Khojram |
Coursera |
April-2023 |
49 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Wankhede Nikhil Prabhakar |
Coursera |
April-2023 |
50 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Borkar Piyush Mahesh |
Coursera |
April-2023 |
51 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Gadekar Pranit Sanjay |
Coursera |
April-2023 |
52 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Dehankar Aman Ramdas (B. E.) |
Coursera |
April-2023 |
53 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Kawale Sakshi Naresh |
Coursera |
April-2023 |
54 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Nimje Aditya Raju |
Coursera |
April-2023 |
55 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Khode Akshay Moreshwar |
Coursera |
April-2023 |
56 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Patne Akshay Ashok |
Coursera |
April-2023 |
57 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Dhapodkar Chetan Pradip |
Coursera |
April-2023 |
58 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Gundawar Himanshu Suresh |
Coursera |
April-2023 |
59 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Meshram Himanshu Rajesh |
Coursera |
April-2023 |
60 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Badri Ibrahim Murtaza |
Coursera |
April-2023 |
61 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
BhangeSwayamdeep Arun |
Coursera |
April-2023 |
62 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Lokhande Udyan Vilas |
Coursera |
April-2023 |
63 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Pohane Aditya Dilip |
Coursera |
April-2023 |
64 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Anshuman PrafullMangrulkar |
Coursera |
April-2023 |
65 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
PatreSpandanDevidas |
Coursera |
April-2023 |
66 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Amale Vaibhav Rajesh |
Coursera |
April-2023 |
67 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Lakhote Sahil Chandrashekhar |
Coursera |
April-2023 |
68 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Wanjari Anmol Khojram |
Coursera |
April-2023 |
69 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Wankhede Nikhil Prabhakar |
Coursera |
April-2023 |
70 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Borkar Piyush Mahesh |
Coursera |
April-2023 |
71 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Gadekar Pranit Sanjay |
Coursera |
April-2023 |
72 |
Supply Chain Management Specialization |
Rutgers the State University of New Jersey |
Dehankar Aman Ramdas |
Coursera |
April-2023 |
73 |
Six Sigma Tools for Define and Measure |
Kennesaw State University |
PRATHAMESH SHAH |
Coursera |
May 4, 2023 |
74 |
Six Sigma Tools for Analyze |
Kennesaw State University |
PRATHAMESH SHAH |
Coursera |
May 5, 2023 |
75 |
Six Sigma Tools for Analyze |
Kennesaw State University |
Faraz Khan |
Coursera |
May 7, 2023 |
Sr.No |
Title Of Programme |
Organised By |
Name Of Participant |
Dates |
1. |
Excel skills for business : essentials |
COURSERA |
AdithyakrishnaPalery |
8-8-2020 |
2. |
AI FOR EVERY ONE |
COURSERA |
AdithyakrishnaPalery |
8-2-2020 |
3. |
PYTHON FOR EVERYBODY |
COURSERA |
VEDANT YERPUDE |
13/9/2020 |
4. |
PYTHON DATA STRUCTURES |
COURSERA |
VEDANT YERPUDE |
10-7-2020 |
5. |
CAPSTONE:- RETRIEVING, PROCESSING AND VISUALIZING DATA WITH PYTHON |
COURSERA |
VEDANT YERPUDE |
10-7-2020 |
6. |
PYTHON FUNCTIONS, FILES AND DICTIONARIES |
COURSERA |
Arpit Mishra |
26/7/20 |
7. |
MATERIAL SCIENCE: 10 THING EVERY ENGINEER SHOULD KNOW |
COURSERA |
KshitijNimje |
29/8/20 |
8. |
CRASH COURSE ON PYTHON |
COURSERA |
KshitijNimje |
3-7-2020 |
9. |
DIGITAL MANUFACTURING AND DESIGN |
COURSERA |
KshitijNimje |
20/7/2020 |
10. |
ENGLISH FOR EFFECTIVE BUSINESS SPEAKING |
COURSERA |
KshitijNimje |
10-7-2020 |
11. |
INTRO TO DIGITAL MANUFACTURING WITH AUTODESK FUSION 360 |
COURSERA |
KshitijNimje |
9-7-2020 |
12. |
Introduction to Programming with MATLAB |
COURSERA |
Atharva Deshkar |
8-1-2020 |
13. |
Introduction to Mechanical Engineering Design and manufacturing with fusion 360 |
COURSERA |
Atharva Deshkar |
25/11/2020 |
14. |
Introduction to CAD, CAM, and Practical CNC |
COURSERA |
Atharva Deshkar |
12-Mar-21 |
15. |
Spreadsheets for Beginners using Google Sheets |
COURSERA |
Atharva Deshkar |
11-Oct-20 |
16. |
Crash Course on Python |
COURSERA |
Atharva Deshkar |
25-Nov-20 |
17. |
First Step Korean |
COURSERA |
SHIVAM N. DEKATE |
16/05/2021 |
18. |
Python Data Structures |
COURSERA |
Kapil Adawadkar |
15-08-2020 |
19. |
Programming for Everybody (Getting Started with Python) an online non-credit course authorized by University of Michigan an |
COURSERA |
Yash Bhatia |
11-08-2020 |
20. |
Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360 |
COURSERA |
NILESH VISHNU KHANDATE |
10-Jan-21 |
21. |
Financial Markets |
COURSERA |
Dhananjay Thakre |
17-Sep-20 |
22. |
AI For Everyone |
COURSERA |
Prajwal Gedam |
07-Jan-21 |
23. |
Introduction to Cybersecurity Tools & Cyber Attacks |
COURSERA |
Prajwal Gedam |
02-Mar-21 |
24. |
Getting Started in Google Analytics |
COURSERA |
Himanshu Choudhari |
31-Jul-20 |
25. |
Python Data Structure |
COURSERA |
Pranav Rajurkar |
06-07-2020 |
26. |
Interfacing with the Arduino |
COURSERA |
Pranav Rajurkar |
07-08-2020 |
27. |
Foundations: Data, Data, Everywhere |
COURSERA |
ShrinathGhuge |
14-May-21 |
28. |
Foundations of Project Management |
COURSERA |
Ketan Wazarkar |
13-May-21 |
29. |
Work Smarter, Not Harder: Time Management for Personal & Professional Productivity |
COURSERA |
Anay Mukte |
26-Sep-20 |
30. |
Project Management: The Basics for Success |
COURSERA |
Anay Mukte |
25-Sep-20 |
31. |
Autodesk CAD/CAM/CAE for Mechanical Engineering |
COURSERA |
MohanishKhotele |
28-Sep-20 |
32. |
Digital Manufacturing & Design |
COURSERA |
MohanishKhotele |
14-Sep-20 |
33. |
Programming for Everybody (Getting Started with Python) |
COURSERA |
MohanishKhotele |
09-Nov-20 |
34. |
Autodesk CAD/CAM/CAE for Mechanical Engineering |
COURSERA |
VedangKorde |
07-Oct-20 |
35. |
Digital Manufacturing & Design |
COURSERA |
VedangKorde |
03-Oct-20 |
36. |
Introduction to Data Analytics for Business |
COURSERA |
Suvradeep Nandi |
17-May-21 |
37. |
Aruba Networking Basics |
COURSERA |
Sumedh Shastri |
19-May-21 |
38. |
Code Yourself! An Introduction to Programming |
COURSERA |
Sumedh Shastri |
18-May-21 |
39. |
Getting Started with AWS Machine Learning |
COURSERA |
Sumedh Shastri |
18-May-21 |
40. |
Psychological First Aid |
COURSERA |
Sumedh Shastri |
19-May-21 |
41. |
Introduction to Personal Branding |
COURSERA |
Sumedh Shastri |
19-May-21 |
42. |
First Step Korean |
COURSERA |
Shantanu Wankhede |
18-May-21 |
43. |
Introduction to Personal Branding |
COURSERA |
Shantanu Wankhede |
19-May-21 |
44. |
Psychological First Aid |
COURSERA |
Shantanu Wankhede |
19-May-21 |
45. |
Code Yourself! An Introduction to Programming |
COURSERA |
Shantanu Wankhede |
18-May-21 |
46. |
Aruba Networking Basics |
COURSERA |
Shantanu Wankhede |
19-May-21 |
47. |
Getting Started with AWS Machine Learning |
COURSERA |
Shekhar Kola |
19-May-21 |
48. |
Psychological First Aid |
COURSERA |
Shekhar Kola |
19-May-21 |
49. |
Aruba Networking Basics |
COURSERA |
Shekhar Kola |
19-May-21 |
50. |
First Step Korean |
COURSERA |
Shekhar Kola |
18-May-21 |
51. |
Code Yourself! An Introduction to Programming |
COURSERA |
Shekhar Kola |
18-May-21 |
52. |
CAD and Digital Manufacturing |
COURSERA |
Abhiroop Sarkar |
04-Jul-20 |
53. |
Python 3 Programming |
COURSERA |
Abhiroop Sarkar |
02-Sep-20 |
54. |
Autodesk CAD/CAM/CAE for Mechanical Engineering |
COURSERA |
SiddheshMorghade |
13-May-21 |
55. |
Python Basic |
COURSERA |
SiddheshMorghade |
25-Jul-20 |
56. |
Python Functions, Files, and Dictionarie |
COURSERA |
SiddheshMorghade |
03-Sep-20 |
57. |
Advanced IOS and Android Ethical Hacking Course |
Udemy |
SHIVAM N. DEKATE |
28/11/2020 |
58. |
Be A Pro : Industrial Panel Design Complete Guide with CATIA |
Udemy |
SHIVAM N. DEKATE |
28/11/2020 |
59. |
Data structure using C programing/with a quiz |
Udemy |
ANKIT R.VAIDYA |
16/01/2020 |
60. |
C++ for beginners |
Udemy |
ANKIT R.VAIDYA |
18/02/2021 |
61. |
PYTHON for beginner course in depth |
udemy |
ANKIT R.VAIDYA |
01-11-2020 |
62. |
Web Development master class |
Udemy |
ANKIT R.VAIDYA |
09-01-2021 |
63. |
vehicle dynamics in automobile |
Udemy |
KshitijNimje |
22/08/2020 |
64. |
Car Specifications |
Udemy |
NidhikaBagde |
August 20 |
65. |
HEAT EXCHANGER |
NPTEL |
Chirag P Raut |
SEP-DEC-2020 |
66. |
Product Design And Development |
NPTEL |
Nayan Choudhary |
SEP-OCT-2020 |
67. |
HEAT TRASFER |
NPTEL |
Aditya Lahane |
SEP-DEC-2020 |
68. |
MECHATRONICS |
NPTEL |
Amit Harish Khapekar |
JAN-MARCH 2021 |
69. |
Fundamentals of Conduction and Radiation ,THERMODYNAMICS |
NPTEL |
Atharva Deshkar |
JAN-APRIL 2020 |
70. |
Product Design And Development |
NPTEL |
Devyani Tiware |
SEP-OCT-2020 |
71. |
FLUID MECHANICS |
NPTEL |
Nishil Kale |
SEP-NOV 2020 |
72. |
HEAT TRASFER |
NPTEL |
Gaurav Puri |
SEP-DEC-2020 |
73. |
HEAT TRANSFER |
NPTEL |
Devesh khadgi |
SEP-DEC-2020 |
74. |
Thermodynamics, ICS, HT, FM, MP,MS |
NPTEL |
Ketan Tarachand Fulzele |
JAN-APRIL 2020, SEP-DEC 2020, SEP-NOV 2020, JAN-FEB 2021 |
75. |
MECHATRONICS |
NPTEL |
Akshay Kulkarni |
JAN-MARCH 2021 |
76. |
HEAT TRANSFER,Fundamentals of Conduction and Radiation |
NPTEL |
Rutul Narendra Warghade |
SEP-DEC-2020 |
77. |
FLUID MECHANICS |
NPTEL |
Satyam NamdeoBhoyar |
SEP-NOV 2020 |
78. |
ENGINEERING DRAWING AND COMPUTER GRAPHICS |
NPTEL |
Dhanshri Naresh Jibhkate |
SEP-DEC-2020 |
79. |
Product Design And Development |
NPTEL |
Ritik Rane |
SEP-OCT-2020 |
80. |
HEAT TRASFER |
NPTEL |
Akshay Karwade |
SEP-DEC-2020 |
81. |
FLUID MECHANICS |
NPTEL |
Pratik Dewangan |
SEP-NOV 2020 |
82. |
Product Design And Development |
NPTEL |
Saurabh Zod |
SEP-OCT-2020 |
83. |
automation in manufacturing |
NPTEL |
Shripad Joshi |
SEP-DEC-2020 |
84. |
HEAT TRASFER |
NPTEL |
Swapnil Wanode |
SEP-DEC-2020 |
S.N |
Name Of Participant |
Title Of Paper |
Type of Publication |
Conference Name |
Organizing Institute |
Date of Conference |
1 |
Yusuf Baig |
Investigation and comparative analysis of laminated composite leaf spring for lightweight vehicles using FEA |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
2 |
Prajwal Chamat |
A Mini-Review On Electro Discharge Machining of Aluminium Metal Matrix Composite Materials |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
3 |
Pratham Atram |
Design and Fabrication of Automatic Quantifiable Cereals Dispenser |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
4 |
Aditya Solanki |
Comparative analysis of NACA 0015 airfoil with bump using CFD |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
5 |
Yogesh Pole |
Experimental Analysis of active and passive cooling of Multijunction Tandem (MJT) cell using various cooling methods |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
6 |
RiteshSureshrao Raut |
Design and Fabrication of Fodder Cutter & Collecting Machine. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
7 |
Syed AvaisAshher |
Design and development of semi-automated sand refining machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
8 |
Ajith Krishnan Nambudiripad |
Fabrication of smartphone operated robotic arm based trasportation vehicle in industries |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
9 |
SahadeoGabhane |
Design of Portable Hand Moving Briquetting Machine. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
10 |
Shubham Bhave |
DESIGN & EVALUATION OF VALUE STREAM MAPPING IN SMALL SCALE INDUSTRY |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
11 |
YASH SURYAKANT DALAL |
Design and development of Pressure cuff baby massager garment |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
12 |
RushabhBokde |
Design and development of Automated Dimension Measurement System by Image Processing |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
13 |
DIPALI KALE |
3d printer filament making machine using PET bottles |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
14 |
Yash Ramesh Kumbhare |
Bharat Thyrometer |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
15 |
ShwetalBadwaik |
Introduction to mileage booster for electric vehicle |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
16 |
Revan Zope |
OPTIMIZATION OF THE PROCESS PARAMETER USING CUSTOMIZED DUAL EXTRUDER 3D PRINTER |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
17 |
Bhavesh musale |
Design and development of rideable luggage |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
18 |
Mansi Kirloskar |
A Literature Survey on Welding Application of Robot Arm |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
19 |
Vishal sureshborule |
A mini-review on continious Passive motion machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
20 |
NinadJawajwar |
Implementation of origami application in a solar PV system: A review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
21 |
Aditya Ramteke |
Investigation of pre and post harvesting factors affecting Onions: A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
22 |
Kevin Daniel |
Review Paper on Smart identified Railway Crossing |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
23 |
DnyandeepRewatkar |
Review on Battery Management Systems in Electric Vehicles |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
24 |
Akash Bhawalkar |
A LITERATURE SURVEY ON OPTIMIZATION OF THE DRILLING PROCESS FOR DIFFERENT MATERIALS |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
25 |
PurveshRangari |
Advance Intravenous Peripheral Cannula: A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
26 |
Nayan korde |
Review On Machines Made For Cotton Crop Harvesting. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
27 |
PriyanshuAshtikar |
POWER GENERATION FOR HIGHWAYS USING A COMPACT ADJUSTABLE VERTICAL AXIS WIND TURBINE |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
28 |
AdeshMeshram |
A review on Actuation of Shape Memory Alloy |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
29 |
Vaishnavi Bharsakle |
A Mini-Review On Adjustable 3D-Printed Wrist Orthosis |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
30 |
Prathamesh Rajesh Dangre |
A Review Paper on Performance Parameters of Pneumatic Ramp. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
31 |
Arpita Pathade, |
Streamlining process flow of manufacturing process in an Aluminium foil rewinding industry- A case study |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
32 |
PraharshKatole |
A Review Paper on best practices of Yarn Winding Machine. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
33 |
Dheeraj Karadbhajne |
Development of improved spraying turntable for the primer shop: A review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
34 |
Ashutosh Gedam |
Grain Drying Process In India |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
35 |
SHREYASH NARESH BHAISWAR |
Numerical Optimization of EDM Process Parameters: An approach |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
36 |
Bhushan Ramesh Kamdi |
Study on Implementation of lean six Sigma in small and medium scale industries |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
37 |
NmanshuKolhe |
Implementation of 5S methodology : Review paper |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
38 |
Rahul Nandankar |
A LITERATURE REVIEW TO ENHANCE THE EFFICIENCY OF PHOTOVOLTAIC PANEL BY STATIONARY COOLING |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
39 |
Pragati Kumbhare |
Review on Earth Heat Tube Exchanger |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
40 |
Dhiraj Ugemuge |
Improvement Of Street Light Pole |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
41 |
Gaurav barekar |
A review Paper on Selection of Hydrogen-rich fuel And their Performing Parameters in PEMFC |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
42 |
Amit prasad |
Automatic Wheelchair Convertible Stretcher :- A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
43 |
Akshay Patil |
Solar Photovoltaic Water Pumping System - A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
44 |
Abhishek Chandanbatwe |
LITERATURE REVIEW OF HEAT TRANSFER IN CONICAL TUBE HEAT EXCHANGER WITH TWISTED STRIP INSERTS INSIDE INNER CIRCULAR TUBE |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
45 |
Aditya Kailash Nagpure |
Review paper on developement and design of hybrid solar and vertical axis wind turbine system |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
46 |
Atharva Paturde |
Development of a fully Automatic Portable light-load Washing Machine for Bachelors. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
47 |
AJIT SINGH SHEKHAWAT |
Plastic And Biomedical Waste Generation And Management Via Pyrolysis : A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
48 |
Anitya Nikose |
A Literature Review of Portable Battery operated Milking Machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
49 |
K s Bais |
AUTOMATED DUSTER FOR CLEANING OF GREEN BOARD |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
50 |
Jitesh Polojwar |
Integrated Pneumatic Jack for four wheeler Vehicle - A Survey |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
51 |
PRATIK PATIL. |
Design and fabrication of automatic T-shirt folding machine with the help of pneumatic |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
52 |
Hitesh Choudhary |
Conceptual design of PVC Powder/Granules and Oil pouring machine for proper blending proportion- A case study |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
53 |
AkashKatkade |
Optimization of titanium skull implant for 3d printing in cranioplasty |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
54 |
Rochak Raut |
Review: Passive Direct Liquid Alkaline fuel cells. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
55 |
DEVESH KADEKAR |
Drying process of Bitter Gourd: A Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
56 |
ChitranshiTagade |
FIXED BED DRYER FOR DRYING OF GREEN PEAS |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
57 |
Avinash Thakare |
Measurement of flank wears using edge detection method |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
58 |
Aditya Thaware |
Critical review on weldability of 316 Austenitic and 410 Martensitic stainless steel |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
59 |
Ashish Umarkar |
Direct liquid Fuel cell :- challenges and Advances |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2023 |
Department of mechanical engineering, YCCE, Nagpur |
2nd to 4th Feb 2023 |
S.N |
Name Of Participant |
Title Of Paper |
Type of Publication |
Conference Name |
Organizing Institute |
Date of Conference |
1 |
RUCHA PATIL, Sameer more |
DESIGN AND FABRICATION OF MULTIPURPOSE MACHINE WHICH INCLUDE SAND PAPER MAKING AND ABRASIVE JET MACHINING USING COCONUT SHELL COVER POWDER AS AN ABRASIVE |
International Conference |
International Conference on Contents, Computing & Communication (ICCCC-2022) |
Matoshri College of Engineerign and Research Centre,Nashik |
26-02-2022 |
2 |
Arpit Mishra, AmeyaKumbhare, Abhiroop Sarkar, Ashish Yesankar, Aditya Sankale |
Design and Fabrication of Bull-Operated Integrated Mulching Machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning( RAMMML-2022) |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
3 |
Pratik Hingnekar, Rohit Rayanutala, ShiivamKawale |
Optimum Sprue design and analysis using InspireCast for performance Improvement in Casting Process |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
4 |
Sahil waquarahmad khan |
A coparative study of a planeNACA2412 Airfoil with a NACA2412 Airfoil attached with Gurney flap using CFD |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
5 |
Junaid qureshi |
Public acceptance of drones |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
6 |
Prajwal gedam |
Application of additive manufacturing in orbital bone fracture reconstruction surgery |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
7 |
Vikram Ghanote |
Ideal Limits And Constraints For Plant Growth In Hydroponics. |
National Conference |
SPANDAN 2022 |
Department of mechanical engineering, YCCE, Nagpur |
8TH TO 9TH APRIL 2022 |
8 |
Prathamesh shah |
SMART BOARD FOR SMART CLASSROOM |
International Conference |
SMART VILLAGE:TECHNOLOGY FOR SUSTAINABLE DEVELOPMENT |
GOVERNMENT POLYTECHNIC SAKOLI |
25-11-2021 |
9 |
Aditya Deshpande, Mohit Gajaralwar |
Design and Fabrication of Electric Bicycle Powered by Solar Cells |
International Conference |
International Conference on Recent Scientific and Technological Trends(ICRSTT) |
Maa Shakumbari Trust, Greater Noida, UP |
24-04-2022 |
10 |
NachiketLohkare, Sanketdhoble, Vedant yerpude |
A Comprehensive review on earth tube exchanger for cooling |
International Conference |
Hindustan Institute of technology Civil enggchenai dec-2021 |
icseec 2021 |
December 16th and 17th 2021 |
11 |
ShubhankarBatwe |
Design of Mulching Machine |
International Conference |
AMEIIM-2022 |
National Institute of Technology, Raipur C.G. |
25-02-2022 |
12 |
Ritik Rane |
Automated sanitizing machine for recording thermal detection and hygine application |
International Conference |
International Conference on Contents, Computing & Communication (ICCCC-2022) |
Matoshri College of Engineerign and Research Centre,Nashik |
23RD AND 24TH APRIL2022 |
13 |
Gaurav Hade |
Mobile application controlled material handling equipment |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
14 |
Devesh L. Khadgi , Akshay R. Karwade, Rutul N. Warghade |
Liquid Cooling Techniques of PV cells: A Brief Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
15 |
Akanksha Bandewar, Shantanu Narwade, Ankush Verma |
Design and development of experimental setup of fatigue testing machine of rod |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
28-04-2022 |
16 |
Prajwal Bhovate,Karan Thakur |
A Review on Design of Human Powered Appliance Review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
17 |
Ishan Lohokare, Jay Dokey,KaranMihani |
Design and Fabrication of Smart Farming Scarecrow |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
18 |
Saurav Gabhane |
Design and Development of Savonius Vertical Axis Wind Turbine for Electricity Generation through High Pressure Wind Produced by Railway Trains Running in India |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
19 |
Aditya Lahane, , Chetna Chakole,Divyazile, Mrunal Ramteke, |
A Review Paper On Active And Passive Air Cooling Techniques For Solar Panels |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
20 |
Ankit Vaidya, , Girish Dhawale, Tejas Dhole, Nishil Kale |
Fluidized bed dryer for some agro product: A brief review |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
21 |
AbhishekhPatne, RushabhPardhi |
Recirculatory Type Charging System |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
22 |
Gaurav Paradkar, SamayakJanbandhu, Sakshi Gadge, NidhikaBagde |
Fixed Bed Dryer for Drying Of Fragmented Brinjal |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
23 |
Gaurav Hade, ShivamPrakash, VedantBarokar |
Mobile Application Controlled Material Handling Equipment |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
24 |
Sharad Neware, Shubham kale |
Design And Fabrication of Ultrasonic Braking Using Smart Sensing Device |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
25 |
AnimeshAdmane, Asawaribhalerao, Akshay Kulkarni |
Study of Pressure Drop on Chevron Plate Heat Exchanger |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
26 |
Chinmay Sohony, Diksha Parwekar, Rohit Gajbhare, Sarvesh Shinghane, |
Ideal Limits And Constraints For Plant Growth In Hydroponics. |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
27 |
Nishikasangode , Yash palker |
Design and development of ginning clutch fixtures |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
28 |
KunjanNinawe, RujveeThengdi |
A Review of the effects of various Electrode Materials in Electric Discharge Machining |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
29 |
Atharva Kedar ,, Ramharilokhande, Sameer wairagade |
Solar operated multi-utility cooler |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
30 |
Riya Chavhan, Amit khapekar, VaibhaoSurpam |
Design and Development of Coconut Husk Pallet Making Machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
31 |
Atharva Nemad, DevyaniTeware ,AalapiBanubakodeShrinathGhuge , Gaurav Puri,Gaurav Puri |
Design and development of universal runner cutting machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
06-05-2022 |
32 |
Jayant Parwate, Prajwal Nerkar, Sonal Katre |
A Need For Prevention Of Uneven Mixing of Pesticides, Fertilizers and Nutrients in Sprayer Pump |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
33 |
VEDANG KORDE |
Design and Fabrication of Electric Scooter |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
34 |
Adhirath Mohite, Saurabh Chaudhri, RupaliSurwase |
Design of Automated Hand Sanitization Machine with Temperature Checking and Entry allowance |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
0022-04-27 |
35 |
Vedant Bachchuwar,AtharvParanjpe, Sakshi Sirsat |
Development Of Multipurpose Pesticides Sprayer |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
36 |
Revan Zope, Prathamesh Dangre, Om Kottewar |
Green Manufacturing And Engineering |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
37 |
Adhirath Mohite, Saurabh Chaudhri, RupaliSurwase , samyakrakhade |
Design of Automated Hand Sanitization Machine with Temperature Checking and Entry allowance |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
38 |
Atharva Nemad,DevyaniTeware, AalapiBanubakode |
Design And DevelopmemtOf Universal Runner Cutting Machine |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
39 |
Bhushan kondalkar, Sahil ashokMankar |
A Study and review of Heat Transfer on Vented Brake Disc Affecting Vibration |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
40 |
Nikita Gudadhe |
Automation In Manifacturing |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
41 |
Abhijeet Dehare, Soham kulkarni, Tanmay nagpure, Vaibhav kawade, |
Development Of Pneumatic Sheet Metal Shearing Machine |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
42 |
Prathamesh Shah |
Smart Board For Smart Class Room |
National Conference |
Spandan 2022 |
Department of mechanical engineering, YCCE, Nagpur |
08-04-2022 |
43 |
Aniket Mandlekar (first author), Concordia University, Gina Cody school of Engineering,Canada,
Atharva Wankhede, Atharva Chaudhari,
Prajwal Gedam,
MohanishKhotele,(Students ME YCCE)
Dr. Jayant Giri (third author),
Rajkumar Chadge (seventh author) |
Workflow of Conversion of CT ScanDicom Image of Reconstructed Humerus Fracture to 3D Printable Model for Preoperative
Usage with the help of Affordable Additive Manufacturing Process |
International Conference |
RAMMML-2022, YCCE |
Department of mechanical engineering, YCCE, Nagpur |
26-27 APRIL 2022 |
44 |
Prof. Ajay Bonde, DikshantKamble,ShashaankLaad, Vedant barhate, Yash Kawalkar, C Kshirsagar |
Optimization of Process Parameters of CNC Milling: An Approach |
International Conference |
RAMMML-2022, YCCE |
Department of mechanical engineering, YCCE, Nagpur |
26-27 APRIL 2022 |
45 |
Dr. J.P. Giri, Shreya Dhapke, Dhananjay Mutyarapwar |
Machine Learning for Designing a Mechanical Ventilator: An Approach |
International Conference |
Book: Transformation in healthcare with emerging Technologies, Published by Chapman and Hall/CRC Press, Taylor and Francis ISBN 9781032063416 |
|
09-05-2022 |
46 |
Prof. Dipti N. Kashyap, Rounak Choudhury, Pranav Thete, Savita Baviskar&PraveshKhatwani |
Electrically Operated Hygiene Bin to Simplify the Initial Stage of Diaper Composting |
International Conference |
Recent Advances in Manufacturing Modelling and Optimization Select Proceedings of RAM 2021 |
Department of Mechanical Engineering,
S. V. National Institute of Technology,
Surat-395007, Gujarat, India |
|
47 |
Prof. V M KORDE,Gauri S. Gotmare, Priya K. Kachhwah&DivyanshuLokhande |
Design and Performance of Plate-Fin Heat Exchanger: A Brief Review |
International Conference |
Advances in Mechanical Engineering and
Technology Proceedings of 6th International
Conference on Advanced Production
and Industrial Engineering (ICAPIE) -
2021 |
DTU DELHI |
23-03-2022 |
48 |
Prof. V M KORDE, shivandekate, Yash A Bais, Chirag Raut |
Performance of an Evaporative Condenser :- A Review |
International Conference |
Technology Innovation
in Mechanical Engineering
Select Proceedings of TIME 2021 |
|
29-04-2022 |
49 |
Prof. Nilesh Gedam, Kaustubh Dhote, Navin Labhan, Sudarshan Bhalge |
Survey and analysis of mulching machine |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
50 |
Prof Dilip sangotra, Kaustubh thengade, Sankalp Kawade, Arnav Chimankar, Dhananjay Thakre |
Fabrication and analysis of Aqua Silencer |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
51 |
Karan Thakur, Prajwal Bhowate, Vaishnavi Deshmukh, AshayDatey, Bhushan Dange, Rakesh adakane |
Design and fabrication of Green power Appliance: Mechanical energy to electrical energy conversion and its real life usage |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
27-04-2022 |
52 |
Devansh Nigam, Mayank, Chauhan, Ram Jaiswal, Saurav Gabhane |
Design and Development of Savonius Vertical Axis Wind Turbine for Electricity
Generation through High
Pressure Wind Produced by Railway Trains Running in India |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
53 |
Prajwal Pusadkar, Sakshi Bhitkar, Mohd Adeeb Khan |
A Mini Review On Methods of Soil Moisture Detection System |
International Conference |
Recent Advances in Materials, Manufacturing and Machine Learning (RAMMML)-2022 |
Department of mechanical engineering, YCCE, Nagpur |
26-04-2022 |
S.N |
Name Of Participant |
Title Of Paper |
Conference/ Journal Name |
Date of Publication |
1 |
JAYANT GIRI, YASH KADU, KUNAL KAWALE, SHREERAM DONGARE, CHETAN MAHATME |
AI AT THE EDGE- THE NEXT GENERATION OF DATA PROCESSING |
DELHI TECHNICAL CAMPUS AIE-2021 |
15-16 APRIL 2021 |
2 |
SUVRADEEP NANDI, KRUNAL GHATE, SHANTANU WANKHEDE, SUVRADEEP NANDI, PRATIKSHA BURDE |
A brief study of advancements in walking devices |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
27/12/2020 |
3 |
Shreya Dhapke |
Design of flexible drawing table using CAD software |
RCOEM, Nagpur |
25/7/2020 |
4 |
SHEKHAR KOLA, KARTIK GIRI,SUMEDH SHATRI |
REDESIGN AND MODIFICATION OF EXISTING EARTH AUGER |
INTERNATIONAL JOURNAL OF ADVANCE RESEARCH AND INNOVATIVE IDEAS IN EDUCATION |
Feb-21 |
5 |
SHEKHAR KOLA, KARTIK GIRI,SUMEDH SHATRI |
DESIGN AND MODIFICATION OF EXISTING EARTH AUGER |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Dec-20 |
6 |
PRATIKSHA KACHARE |
Review paper for design and development of earth auger |
INTERNATIONAL JOURNAL FOR SCIENTIFIC RESEARCH AND DEVELOPMENT |
Apr-21 |
7 |
PRATIKSHA KACHARE |
design and development of earth auger |
INTERNATIONAL JOURNAL OF RESEARCH AND ANALYTICAL REVIEWS |
Mar-21 |
8 |
PRATIKSHA KACHARE, AKANSHA FULE |
REDESIGN AND MODIFICATION OF EXISTING EARTH AUGER |
INTERNATIONAL JOURNAL FOR SCIENTIFIC RESEARCH AND DEVELOPMENT |
Apr-21 |
9 |
SUJATA GAWANDE, SAKSHI PANDE, PRANAY WASNIK |
DESIGN AND DEVLOPMENT OF AIR CONDITIONING SYSTEM FOR HEAVY DUTY TRUCKS USING SOLAR PANEL |
ZEICHEN JOURNAL |
Mar-21 |
10 |
ATHARVA BHAJNE, SHRINATH PENDKE, AMAN GHATE,VEDANG BHISNE,GAJANAN KEDAR, DR. SHRIKANT JACHAK |
AUTOMATIC PRE-EMPTIVE SAFETY MEASURES FOR COLLISION AND DENTS USING PNEUMATIC SYSTEM |
INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING AND MANAGEMENT |
|
11 |
DIKSHA WASEKAR |
EFFICIENT MILK CHILLER FOR SMALL SCALE DAIRY FARMERS |
INTERNATIONAL JOURNAL OF ALL RESEARCH EDUCATION AND SCIENTIC METHODS |
May-21 |
12 |
RITIKA DESHMUKH, RUSHIKESH PAHADE |
DESIGN OF FOLDABLE SHIPPING CONTAINER |
ZEICHEN JOURNAL |
May-21 |
13 |
DR. S.S KHEDKAR, SANJYOT DAFALE, LOHITA POTUKUCHI, RUTVIK GUPTE,ANURAG MURME, RAHUL GUPTA |
STUDY OF LIQUID DISPENSINGAND MIXINGIN FLUID HANDLING SYSTEMS A REVIEW ARTICLE |
INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING AND MANAGEMENT |
Apr-21 |
14 |
PROF. A.J.BAMNOTE, ANIRUDDHA DESHPANDE, KAUNTEYA DESHPANDE, VEDANG MOHARIL |
SELF ERECTING TENT USING TELESCOPIC MECHANISM |
INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING AND MANAGEMENT |
Mar-21 |
15 |
ASHUTOSH SATPUTE, PRATIK GONARKAR, SANDIP MANWATKAR |
DEVELOPMENT AND ANALYSIS OF PEM FUEL CELL FOR HYBRID ELECTRIC FUEL CELL VEHICLE |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Apr-21 |
16 |
TAPESH DULE, SIDDHARTH GUPTA |
A REVIEW ON PORTABLE VENTILATOR WITH IN OXYGEN GENERATOR |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Jan-21 |
17 |
SHALAKHA HADKE, YASH BHATIA |
DEVELOPMENT OF WALKER TO SUPPORT HIPS WHILE STANDING FROM SEATING |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Mar-21 |
18 |
VIVEK MISHRA, BHUSHAN SONWANE, SURAJ KONTAMWAR |
DESIGN AND DEVELOPMENT OF AUTOMATIC EXTERNAL PIPE CLIMBER |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Dec-20 |
19 |
VIPIN TEKADE |
DESIGN AND FABRICATION ON CULTIVATOR AND SPRAYER MACHINE |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Mar-21 |
20 |
SAJAL MOHARKAR, TANMAY DESHMUKH |
PERFORMANCE EVALUATION OF MANUFACTURING INDUSTRIES BY USING 5S TECHNIQUES |
INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS |
Feb-21 |
21 |
DR. S.S.KHEDKAR, MOHAMMAD KHAN, SWARAJ YELNE, KSHITIJ MAHANT, PARTH RATHOD |
DESIGN AND FABRICATION OF TRENDING MACHINE |
INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING AND MANAGEMENT |
|
22 |
VAIBHAV CHOPADE, ARJUN GADE,PRAJAKTA BHELAWE, TILAKSHAHA KANGALI |
OPTIMIZATION OF FOOD PROCESSING INDUSTRY TO INCREASE THE PRODUCTIVITY BY USING 5S METHODOLOGY |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
May-21 |
23 |
AJINKYA TARODKAR |
ASSISTANCE TO A PATIENT DURING SIT-TO-STAND MOTION USING A WALKER |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Jun-21 |
24 |
CHINMAY METANGALE,JAYESH THOTE |
BANKING PAYMENT SERVICES INNOVATIONS- A KEY TO ECONOMIC GROWTH |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Dec-20 |
25 |
DEEPAK METHWANI |
DESIGN AND DEVELOPMENT OF ELECTRIC KART MOTOR COOLING SYSTEM |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Jan-21 |
26 |
JAYESH THOTE |
IOT BASED ENERGY MANAGEMENT SYSTEM |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Dec-20 |
27 |
KALPESH GAVHANDE, KRUTIKA BAKDE |
AUTOMATIC MULTIPURPOSE SANITIZING BOOTH |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Jan-21 |
28 |
UTSAV BORSARE, TEJAS THAKRE |
AN ANALYSIS OF BRAKING ENERGY REGENERATION IN VEHICLE |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Mar-21 |
29 |
KEDAR GODE,ANKUSH TELMASRE, ADITYA DUKARE,ATHARVA TIKAT |
DESIGN AND DEVELOPMENT FENCING MACHINE |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Jan-21 |
30 |
RAHUL YELANE, AJINKYA GAIKWAD |
DESIGN OF PEM FUEL CELL FOR SMALL SCALE APPLICATIONS |
ZEICHEN JOURNAL |
Jan-21 |
31 |
NEVAL POPHARE, TUSHAR MALVI |
DESIGN AND DEVELOPMENT OF AUTOMATIC WHITE/BLACK BOARD CLEANER |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Feb-21 |
32 |
TANMAY KARANDIKAR |
DEVELOPMENT OF AN AUTOMATED CHIP REMOVAL MECHANISM FOR CNC CHINA ANGLE DRILLING MACHINE |
INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT |
Apr-21 |
33 |
AJKASH DEURKAR |
REVIEW PAPER ON AUTOMATIC SHIRODHARA MACHINE |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Mar-21 |
34 |
ANKEET ASWALE, TEJAS DONGRE |
DESIGN OF PELTIER OPERATED DEHUMIDIFIER |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Mar-21 |
35 |
ANKUR THAKAR |
PASSIVE GENERATION OF ELECTRICAL ENERGY FROM A SOLAR WATER HEATER |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Apr-21 |
36 |
DHANASHREE DONGRE |
DESICCANT DEHUMIDIFICATION AND SOLAR THERMAL REGENERATION AIR CONDITIONING SYSTEM |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
May-21 |
37 |
PRAJWAL WANJARI |
A REVIEW ON VARIOUS METHODS FOR SELF-BALANCING OF ELECTRIC TWO WHEELER |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Apr-21 |
38 |
AASHAY HADKE |
DESIGN OF AUTOMATIC DISHWASHER FOR CATERING SERVICES |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Jan-20 |
39 |
PRATIK MUNGLE, NIKESH BADWAIK |
DESIGN AND DEVELOPMENT OF AUTOMATED TYRE INFLATION SYSTEM USING COMPRESSED AIR PRODUCED BY VEHICLE SUSPENSION |
ZEICHEN JOURNAL |
Mar-21 |
40 |
SurveshGanghettiwar, vishal mohite |
Design and fabrication of under water surveillance drone |
INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY |
Mar-21 |
Sr. No. |
Title of Program |
Organised by |
Name of Participants |
Completion Date |
1 |
Training |
ISRO,Government of India-IIRS Outreach Program-“Geo-data sharing and Cyber Security” |
prachiteshWakde |
21/10/2022 |
2 |
Workshop |
ISRO,Government of India-IIRS Outreach Program-Applications of
Geospatial Technology in Paleochannel Studies: Potential And Future Trends |
prachiteshWakde |
10-11-2022 |
3 |
Training |
S.S.CAD PRO & MKCL-
Certificate course in Creo |
Sharvari Pathak |
30/06/2022 |
4 |
Workshop |
PDPM Jabalpur-NEP 2020 IN Higher Education,
Shaping the Shapers
Workshop in collab. With RFRF and Bhartiya Shikshan Mandal |
Sharvari Pathak |
27/12/2022 |
5 |
Short Term Training
Program (STTP) |
Techgyan Technologies |
Mohammad Atif Khan |
31/12/2022 |
6 |
Short Term Training
Program (STTP) |
Google Digital Unlocked-
The Fundamentals of
Digital Marketing |
Mohammad Atif Khan |
26/10/2022 |
7 |
Short Term Training
Program (STTP) |
Prime Minister's Research
Fellowship Scheme ,
IISC Bangalore and AICTE |
Prathmesh Shah |
Apr-22 |
8 |
Short Term Training
Program (STTP) |
IIT Bombay |
Gagan Kaware |
10-09-2022 |
9 |
Short Term Training
Program (STTP) |
IIT Bombay |
Gagan Kaware |
11-09-2022 |
10 |
Short Term Training
Program (STTP) |
IIT Bombay |
Ram Sant |
10-09-2022 |
11 |
Short Term Training
Program (STTP) |
GUVI and GOOGLE for Education |
Atif Khan |
14/07/2022 |
12 |
Short Term Training
Program (STTP) |
Elsevier Academy |
Sharvari Pathak |
13/12/2022 |
13 |
Short Term Training
Program (STTP) |
TCS ion Career edge-
Young Professional |
Sharvari Pathak |
15/02/2023 |
14 |
Short Term Training
Program (STTP) |
Barclay Lifeskill Programme |
SahadeoGabhane |
14/05/2022 |
15 |
Training |
Linked in Learning-
SOLIDWORKS 2019
Essential Training |
Mansi Kirloskar |
21/07/2022 |
16 |
Training |
Linked in Learning-
Project Management:
Technical Projects |
Mansi Kirloskar |
07-12-2023 |
17 |
Short Term Training
Program (STTP) |
IRO YCCEAND Department
of Electronics Engineering ,YCCE |
Prathmesh Shah |
30/04/2022 |
18 |
Training |
Intellectual Property India (IP),
Office of Controller General of
Patents,Design and Trade Marks-
IP Awareness/Training
Programme |
Mohammad Atif Khan |
02-06-2023 |
19 |
Workshop |
Techgyan Technologies &
Abhyudaya IIT Bombay-
Machine Learning Workshop |
Mohammad Atif Khan |
31/12/2022 |
20 |
Workshop |
Techgyan Technologies &
Abhyudaya IIT Bombay-
Internet of Things IoT Workshop |
Mohammad Atif Khan |
31/12/2022 |
21 |
Workshop |
Techgyan Technologies &
Abhyudaya IIT Bombay-
Android App Development
Workshop |
Mohammad Atif Khan |
31/12/2022 |
22 |
Short Term Training
Program (STTP) |
GUVI and GOOGLE for Education-
Basics of Internet |
Atif Khan |
14/07/2022 |
23 |
Workshop |
Techfest IIT Bombay-Machine Learning |
Rushi Shukla |
17/12/2022 |
24 |
Workshop |
Google Digital Unlocked-
The Fundamentals of
Digital Marketing |
Tanmay Thakre |
25/01/2023 |
25 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
MISHRA SHRADDHA VIJAYRAO |
17th Jan to 3rd Feb, 2023 (20Hrs) |
25 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
GAWANDE KUSHAL PRAMOD |
17th Jan to 3rd Feb, 2023 (20Hrs) |
26 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BHARADKAR AKSHAY DHARMENDRA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
27 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
HAJARE DHANANJAY SURESH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
28 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BADRI IBRAHIM MURTAZA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
29 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
MAROTKAR SIMRAN ASHISH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
30 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
SHENDRE DEVESH SURENDRA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
31 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
KATRE BHIVESH BHUPENDRA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
32 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
PANDE SAURABH VIJAY |
17th Jan to 3rd Feb, 2023 (20Hrs) |
33 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BAIS AYUSHI SUNILSINGH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
34 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
SATFALE SAILI RAJU |
17th Jan to 3rd Feb, 2023 (20Hrs) |
35 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
KULSANGE NEMASHRI KAWDUJI |
17th Jan to 3rd Feb, 2023 (20Hrs) |
36 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
MASKE PARTH PRASHANT |
17th Jan to 3rd Feb, 2023 (20Hrs) |
37 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
KHOBARAGADE PRASAD PRKASH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
38 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
CHAVHAN SAKSHI VILASRAO |
17th Jan to 3rd Feb, 2023 (20Hrs) |
39 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
ATHAWALE PAVITRA SURESH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
40 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BAMBAL HIMANSHU SURENDRA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
41 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
TATHOD NIRAJ VINAYAK |
17th Jan to 3rd Feb, 2023 (20Hrs) |
42 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
KAPKAR DURGESH GANESH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
43 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
GAIKWAD MOHIT ANIL |
17th Jan to 3rd Feb, 2023 (20Hrs) |
44 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BHANDARE METTA DNYANESHWAR |
17th Jan to 3rd Feb, 2023 (20Hrs) |
45 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
ANSHUMAN PRAFULL MANGRULKAR |
17th Jan to 3rd Feb, 2023 (20Hrs) |
46 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
GAIKI TEJAS RAMKRUSHNA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
47 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BHAISARE APEKSHA KISHOR |
17th Jan to 3rd Feb, 2023 (20Hrs) |
48 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
MENDHE TUSHAR RAJESH |
17th Jan to 3rd Feb, 2023 (20Hrs) |
49 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
GEDAM DIPALI BHAGWAN |
17th Jan to 3rd Feb, 2023 (20Hrs) |
50 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
DHOKE AKASH BHOJRAJ |
17th Jan to 3rd Feb, 2023 (20Hrs) |
51 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
DHABARDE HIMANSHU RAMESHWAR |
17th Jan to 3rd Feb, 2023 (20Hrs) |
52 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
KANNAKE DHARMRAJ DEVANAND |
17th Jan to 3rd Feb, 2023 (20Hrs) |
53 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
SHELKE NAVNEET SUDHIRRAO |
17th Jan to 3rd Feb, 2023 (20Hrs) |
54 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
DHOK PRAJWAL BABA |
17th Jan to 3rd Feb, 2023 (20Hrs) |
55 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
BHIVGADE AVIRAL SANJAY |
17th Jan to 3rd Feb, 2023 (20Hrs) |
56 |
Short Term Training
Program (STTP) |
CATIA V-5 by Virtual SimutechPvt.Ltd.Pune
Instructor:Mr.Anil Jain &Mr.amitBadwaik |
DHAPODKAR ADITYA DILIP |
17th Jan to 3rd Feb, 2023 (20Hrs) |
57 |
Workshop |
Automobile at Techfest. IIT Bombay |
Ayush Vinod Narkhede |
16-12-2022 |
S.N |
Title of Programme |
Organised by |
Name of Participant |
Exam date |
1 |
NX-CAM, |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Bhushan kondalkar |
24-09-2021 |
2 |
Plant design and management system (pdms) |
AVEVA technologies |
Pratik Ramajilanjewar |
20-11-2021 |
3 |
C# Console and Windows Forms Development with LINQ & ADO.NET |
ûdemy |
Devanshraut |
30-11-2021 |
4 |
Plant design and management system |
AVEVA technologies |
Ankit funde |
10-12-2021 |
5 |
Life skill program |
Barclays |
Faraz Khan |
24-10-2021 |
6 |
Python language |
Binary Brains |
Atharva |
01-09-2021 |
7 |
Core java |
Ccit classes |
VedantiHande |
01-07-2021 |
8 |
Nx cam basic to advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
UJWAL KISHOR GHATE |
25-11-2021 |
9 |
Nx cam basic to advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Prathamesh Rajesh Dangre |
23-10-2021 |
10 |
ELECTRIC AND HYBRID VEHICLES |
CIIIT(A Joint Initiative of Tata Technologies & GCOE Chandrapur) |
Hemant Khiratkar |
15-10-2021 |
11 |
Machine Learning With Python |
Cognitive Classes |
AMIT PRASAD |
21-11-2021 |
12 |
NX CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Shreyashwakde |
23-10-2021 |
13 |
“Introduction& Application of CAE using ANSYS†|
Mechanical Engineering Department at YCCE Nagpur |
Akanksha Bandewar |
10-08-2021 |
14 |
CATIA PROFESSIONAL |
DCS |
Ninad Ramesh Jawajwar |
29-09-2021 |
15 |
Graphic programming in C |
Department of electronic engineering |
Siddheshwarganeshyerne |
18-10-2021 |
16 |
"MATLAB,MULTISIM& ORCAD" |
Department of electronics and telecommunications YCCE |
Aniket Babhale |
09-10-2021 |
17 |
Introduction and application of CAE using ANSYS |
Department of mechanical engineering (D.Y.SHAHRE) |
Saurabh uttamyerpude |
16-11-2021 |
18 |
ANSYS |
Department of mechanical engineering , YCCE |
Hardik lohare |
21-10-2021 |
19 |
Computer aided Manufacturing using NX-CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Divyanshudangore |
01-10-2021 |
20 |
Introduction & Application of CAE using ANSYS |
Department of Mechanical engineering at YCCE |
Vedant Yerpude |
11-09-2021 |
21 |
PLANT DESIGN AND MANAGEMENT SYSTEM |
DEPARTMENT OF MECHANICAL ENGINEERING YCCE |
PRATHAMESH KAMLESHKUMAR SHAH |
20-11-2021 |
22 |
INTRODUCTION AND APPLICATION USING CAE AND ANSYS |
DEPARTMENT OF MECHANICAL ENGINEERING YCCE,NAGPUR |
PRATHAMESH KAMLESHKUMAR SHAH |
29-10-2021 |
23 |
Introduction & Application of CAE using ANSYS |
Department of Mechanical Engineering, YCCE, Nagpur |
Akash Sakharam Kadam |
18-11-2021 |
24 |
Introduction and application of CAE using ANSYS |
Department of Mechanical Engineering, YCCE, Nagpur |
Gaurav Barekar |
16-11-2021 |
25 |
Introduction and Application of CAE Using ANSYS |
Department of Mechanical Engineering, YCCE, Nagpur |
Harsh Kadu |
16-11-2021 |
26 |
BARCLAYS lifeskills programs |
Dr . Uma ganesh GTT foundation |
Saurabh uttamyerpude |
24-10-2021 |
27 |
Plant Design and Management System |
AVEVA technologies |
Rohit R. Shende |
22-11-2021 |
28 |
Plant Design And Management System |
AVEVA technologies |
Deepak Nilkanth Gawande |
22-11-2021 |
29 |
Barcleys Life Skill Programme |
Dr.Uma Ganesh |
ShreyashMeshram |
24-10-2021 |
30 |
Fundamentals of Manuscript preparation |
ELSEVIER RESEARCH ACADEMY |
Akshay Kulkarni |
06-10-2021 |
31 |
GTT Barclays |
GTT Barclays |
Sharvari Pathak |
24-10-2021 |
32 |
LIFE-SKILL PROGRAM |
GTT FOUNDATION |
Yash sorte |
24-12-2021 |
33 |
GTT BARCLAYS life skill program |
GTT foundation |
SnehanshuSomkuwar |
24-10-2021 |
34 |
Barclays Lifeskills Programme |
GTT foundation |
Arpita Pathade |
24-10-2021 |
35 |
Barclays LifeSkills Programme |
GTT Foundation |
SHUBHAM NAMDEO BHAVE |
24-10-2021 |
36 |
Barclays Life Skills Programme |
GTT Foundation |
Nikhil Santosh Tekade |
24-10-2021 |
37 |
Barclays lifeskill program |
GTT foundation |
Umang Chikte |
24-10-2021 |
38 |
GTT Barclays |
GTT Foundation |
Yash Belekar |
24-10-2021 |
39 |
Barclays Life Skills Programme |
GTT Foundation |
Jitesh Vijay Polojwar |
24-10-2021 |
40 |
Barclays Lifeskills Program |
GTT Foundation |
Mayur VinodraoPusnake |
24-10-2021 |
41 |
Barclays Lifeskill programme |
GTT foundation |
Govind Prasad |
24-10-2021 |
42 |
BARCLAYS LIFESKILL PROGRAMME |
GTT FOUNDATION AND T&P CELL YCCE NAGPUR |
PRATHAMESH KAMLESHKUMAR SHAH |
24-10-2021 |
43 |
Barclays Life Skill Programme (Aptitude) |
GTT FOUNDATION Collaboration with YCCE |
Rushabh Vinod Bokde |
24-10-2021 |
44 |
Basic Computer Skills |
Indian Institute of Information Technology, Kota |
Saurabh Vitthal Nirantar |
26-09-2021 |
45 |
Isro |
Indian space research organisation |
Bhavesh musale |
28-09-2021 |
46 |
Advanced Embedded Systems using Arduino Course |
KitFlix |
Tanmay Umathe |
24-08-2021 |
47 |
PDM |
ME DEPARTMENT IN ASSOCIATION WITH AVEVA TECHNOLOGYA |
Saurav Gabhane |
31-10-2021 |
48 |
Plant Design and Management system |
AVEVA technologies |
Kartik Wanjari |
31-10-2021 |
49 |
Computer aided manufacturing using NX CAM basics to advance |
Mechanical department YCCE |
SnehanshuSomkuwar |
23-10-2021 |
50 |
Introduction and Application of CAE using Ansys |
Mechanical Engineering department |
Nikhil Santosh Tekade |
11-09-2021 |
51 |
Introduction And Application Of CAE using ANSYS |
Mechanical Engineering Department at YCCE |
Kshitij Rupesh Ramteke |
11-09-2021 |
52 |
Introduction and application of CAE using ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
SHUBHAM NAMDEO BHAVE |
11-09-2021 |
53 |
Introduction & Application of CAE using ANSYS |
Mechanical Engineering Department at Yeshwantrao Chavan College of Engineering |
KunjanNinawe |
11-09-2021 |
54 |
NX CAM |
Mechanical Engineering Department, YCCE |
KshitijBhadke |
25-11-2021 |
55 |
TCS-iON Career edge - Young professionals |
Mehul Mehta |
ShreyashMeshram |
26-08-2021 |
56 |
GTT Barclay's |
OTHER |
Yusuf Baig |
24-10-2021 |
57 |
Plant Design and Management System (PDMS) |
AVEVA technologies |
Suraj Bokade |
20-11-2021 |
58 |
Barclays Lifeskills Programme |
OTHER |
ShreyashAshokraoBorghare |
24-10-2021 |
59 |
Combined annual training camp |
OTHER |
Nikhil Santosh Tekade |
31-10-2021 |
60 |
creating data visualization dashboards |
OTHER |
AdithyakrishnaPalery |
12-09-2021 |
61 |
Masterclass on EV design using Matlab |
Pantech learning & Skill APSSDC |
Shripad Joshi |
21-09-2021 |
62 |
Ansys |
Mechanical Engineering Department at YCCE Nagpur |
Nikita Gudadhe |
20-10-2021 |
63 |
PDMS and Barclays Lifeskills Program |
AVEVAtechnologies ,Dr. Uma Ganesh (GTT Foundation) |
Himanshu Tajne |
20-11-2021 |
64 |
INTRODUCTION AND APPLICATION OF CAE USING ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Shubham. P. Nimsarkar |
16-11-2021 |
65 |
Introduction & Application of CAE using ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Rushabh Vinod Bokde |
21-10-2021 |
66 |
Introduction and application of CAE by using ANSYS |
Prof.Mechanical Engineering Department at YCCE Nagpur |
ShreyashMeshram |
11-09-2021 |
67 |
Python programming-virtual training |
Ram Tavva |
ShreyashMeshram |
15-09-2021 |
68 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Prajwal Chamat |
23-10-2021 |
69 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Atharv Paranjape |
23-10-2021 |
70 |
NX-CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Sahil ashokmankar |
23-10-2021 |
71 |
“Computer -Aided Manufacturing using NX-CAM Basics to Advanced†|
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) under the aegis of IQAC |
Riya Chavhan |
23-10-2021 |
72 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced†o |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) under the aegis of IQAC at YCCE , Nagpur, |
Ritik Rane |
23-10-2021 |
73 |
Computer aided Manufacturing using NX-CAM Basics to advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics under the aegis of IQAC |
Vaibhao Omprakash Surpam |
24-09-2021 |
74 |
Python Core |
Sololearn |
SaksheeTembhurkar |
30-07-2021 |
75 |
SQL |
Sololearn |
Shripad Joshi |
25-08-2021 |
76 |
Cloud Computing |
Team Pragyastra |
Rushabh Vinod Bokde |
20-07-2021 |
77 |
Introduction And Application Of ANSYS |
Yashwantrao Chavan College Of Engineering, Nagpur. |
Chandrakant Kshirsagar |
11-09-2021 |
78 |
Computer aided manufacturing using NX-CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Dheeraj karadbhajne |
23-10-2021 |
79 |
Introduction & Application of CAE using ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Dhiraj Ugemuge |
21-10-2021 |
80 |
ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Akash Bhawalkar |
22-09-2021 |
81 |
Introduction and application CAE using ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Parvesh Sudhakar badole |
10-08-2021 |
82 |
Computer-Aided Manufacturing using NX-CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Raj Satish Gupta |
25-11-2021 |
83 |
Plant design and management system |
AVEVA technologies |
Kalyani LobheshraoBawankar |
20-11-2021 |
84 |
Computer Aided Manufacturing using NX-CAM Basics to Advanced. |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Karan Thakur |
25-11-2021 |
85 |
Nx-Cam |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Pranjal Bopate |
23-12-2021 |
86 |
PDMS |
AVEVA technologies |
Kawade Vaibhav Rajaram |
20-10-2021 |
87 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Vedant Bachchuwar |
23-10-2021 |
88 |
Introduction and application of CAE using ansys |
Mechanical Engineering Department at YCCE Nagpur |
Digvijay D. Salve |
21-10-2021 |
89 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Aniruddha Jagirdar |
23-10-2021 |
90 |
Graphics programming in C |
Ycce |
Lalit Bhute |
09-10-2021 |
91 |
NX cam |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Atharva Satish Nemad |
26-11-2021 |
92 |
Gttbarclays |
Ycce |
Abhishek rajuchandanbatwe |
09-10-2021 |
93 |
NX-CAM |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
CHETAN KONDE |
24-09-2021 |
94 |
Introduction & Application of CAE using ANSYS |
Mechanical Engineering Department at YCCE Nagpur |
Saurabh Pandit |
16-11-2021 |
95 |
Computer -Aided Manufacturing using NX-CAM -Basics to Advanced |
Siemens Centre of Excellence for Digital Manufacturing and Robotics (NAFETIC) |
Bhavesh Parate |
01-11-2021 |
96 |
“Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
YCCE MECHANICAL DEPARTMENT |
Sameer J Morey |
25-11-2021 |
97 |
Computer -Aided Manufacturing using NX-CAM Basics to Advanced |
Yeshwantrao Chavan college of Engineering |
Bharat Ramesh Mate |
23-10-2021 |
98 |
“Introduction& Application of CAE using ANSYS†|
Yeshwantrao Chavan College Of Engineering Nagpur |
Tejas Vishwas Dhole |
22-09-2021 |
99 |
Introduction and application of CAE using ansys |
Yeshwantraochavan College of engineering, nagpur |
Rupali Surwase |
11-11-2021 |
100 |
Plant Design and Management System |
YeshwantraoChavhan College of Engineering |
Ashish KailasraoYesankar |
20-11-2021 |
101 |
Introduction &Application of CAE using Ansys |
YESHWANTRAO CHAWAN COLLEGE OF ENGINEERING NAGPUR |
Ankush verma |
11-09-2021 |